Do you know the qualities of the best professional router table? Do you know about the prices at which they are available? Apart from that are you satisfied with the current router table that you have?
What else do you look for in a router table apart from the price? Well, in order to find out the answer to these questions, you have to read this article as it includes a selection of some of the best router tables. Below in this article, you will find 6 examples of router tables that you might find interesting and might fit your standards.
What is a Router Table?
A router table can be classified as a special type of table where you can fix up a router. The router can be fixed either on the top, upside down or on the underside of the tabletop. These router tables usually come up with brackets so that you can secure them on the tabletop.
Currently, there are many kinds of router tables available out there in the market. Some of them are for beginners while some are for industrial use. You can use some router tables in small shops and some are available for larger use.
In this article, we will be finding out more about router tables and the specifications that they have. Different kinds of router tables have different uses and features. It is very important to find out in detail about them before you buy them.
A good router table is one that has all the parts designed properly and which is made up of good quality materials. The alignment and the brackets should fit properly and it should be easy to assemble them.
Almost all router tables come up with a manual that you can read and then follow the instructions about assembling it as well as how to use it. Read below to find out 6 router tables.
Best Professional Router Table Reviews
1. Bosch Benchtop Router Table RA1181
Looking for a router table that can fit upon any bench? Have a look at this one. This benchtop router table has a 27 by 18 inches of the work surface. It also includes a router table and 2 feather boards.
However, there are also a few negative points about this router table which you should keep in mind before you buy it for yourself. The first concern that comes with this benchtop router table is that the mounting plate is very rough and uneven as well. Since it is uneven, then it is very hard to work on it.
Apart from this, the power switch might also stop working soon just within a few months of usage. This can be quite disturbing. A lot of time is wasted in just adjusting this router table and it is quite hard in adjusting the router table.
Most of the parts of this benchtop router table are made out of cheap quality materials. It might even be the case that they have used old materials in the building of this router table. This means that this router table does not have a long shelf life.
Even the instructions about assembling the router table are not proper and comprehensive. The whole thing hardly stays disassembled unless you hold tension on it.
- 2 adjustable feather boards
- Includes router table and mounting hardware
- Starter pin and guard, outfeed fence shims
- Equipped with dust collection port
- Has a one-year warranty
- Mounting plate is rough
- Router table is quite uneven
- Parts not assembled properly
- Power switch must stop working soon
2. Bosch Cabinet Style Router Table RA1171
If you wish to get a cabinet style router which is quite convenient then go for this one. It features a dual outlet switch along with a 6 feet power cord. The fence is complete as it has adjustable MDF face plates to allow good operation as well.
On the other hand, you might have to keep a few considerations in your mind before you opt to buy this so that you do not face any issue after buying it. Most of the parts of this benchtop router table are made out of cheap quality materials. It might even be the case that they have used old materials in the building of this router table. This means that this router table does not have a long shelf life.
The instructions about assembling this cabinet style router table are also very confusing and you have to put on too much tension to keep the parts assembled. You might also notice that the mounting table of this router machine is extremely uneven and keeps on rocking back and forth which is why it will be quite difficult to use it.
The metal parts of this router table are made in China so their quality is quite cheap. They might have even reused these metal parts and they are selling them out as new products which are pure cheating! People might buy them thinking that they are new but, in fact, they are not at all real products! They should be sold as refurbished products.
- Accessory slot available and can store feather boards
- Bench top router table included
- Adjustable clear guard
- Starter pin and guard
- Rigid aluminium router mounting plate
- Easy to use
- Many options available for cleaning it
- Metal parts of this router table might be old
- Too much tension required in assembling the parts
- Router table and its parts are made up of cheap quality materials
- Not worth the price you pay for it
3. Kreg PRS2100 Bench Top Router Table
So far, we have heard and read about the normal bench top router table, but what about the industrial quality fence with adjustable fences? Here, read about this bench top router table. It will be quite a good choice to buy this bench top router table apart from a few negative points that it has.
One of the biggest issue that this router table has are the cam locks which are absolutely useless. These cam locks keep on moving when you will tighten the fence. The insert leveling system has to be adjusted again and again and if you do not, it will work poorly. Although this benchtop router table is advised as an industrial fence, it does not even qualify for use for a beginner as it is a total waste of money.
The edges of the benchtop router table are all of the plastic and they are quite sharp, almost sharp like a razor. This can be quite dangerous and the company can be sued for making dangerous products, because imagine if it hurts anyone really bad.
The fence is made up of complete plastic and the price of the paperweight is too much. Even the knobs spin a lot, so you have to use both your hands as well as keep a screwdriver which can be quite annoying since this should be a single-handed work.
The construction of this benchtop router table looks solid however the designing done of this benchtop router table is flawed big time. It takes a long time for the table to be built up and even the miter gauge is not manufactured properly which makes it too hard to use this benchtop router table.
The main issue is that this table costs a lot and in return, it does offer what it exactly should. It is not at all worth paying the price at which it is available, so you need to keep that in mind.
- Industrial quality fence
- Includes the MDF top
- Heavy duty steel stand
- Level loc reduced rings
- Steel stand adds durability
- Equipped with extra-large MDF table
- Not worth the price you pay for it
- Knobs are difficult to control
- Flawed designing
- Assembling takes up a lot of time
Best Router Table For The Money
4. Kreg PRS1045 (KRS1035, PRS1025, PRS1015) Router Table with PRS3090 Caster, PRS3020 True-Flex, PRS3100 Router Table Switch, PRS3400 Set-Up Bars, and KRS7850 Router Table Stop
Are you interested in buying a benchtop router table that comes with a stand? If yes, then have a look at this one. This router table comes with a factory warranty, so that if there is any issue in it, you can send it to the concerned department and they will get it fixed for you.
Before buying this router table, you also have to look upon a few considerations about this router table. It does look promising but even then you must look for all the negative points that it has before buying it. The first thing that you have to keep in mind is that it is too far from being qualified as a precision router table. The fence plates are not aligned properly as well.
The second most annoying concern that has been raised up by many users is that they have ordered it more than one time but both of the time they have received the router table with missing parts. With the missing parts, of course, you cannot use it properly.
The quality control is just horrible for this router table. One more concern is that the bars might also be missing and you might receive the wrong sizes of them. Apart from that, the fence might be extremely difficult to use as they are screwed by the nylon screws which have to be loosened up in order to move the fence.
Apart from this, there have been complaints from users about the fact that if they have any complaints or issues and tried contacting the customer service, they got no help. The customer service is pathetic and they will be of no help to you.
- Comes with factory warranty
- Self-squaring router table fence system
- Insert plate system
- Customizable and heavy-duty router table
- Available on discounted price
- Steel stand can be adjustable according to your desire
- Pathetic customer service
- Fence is extremely difficult to use
- Might come with missing parts
- Quality control is poor
Best Benchtop Router Table
5. Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension
You might feel too worried about which router table to buy when you work in a small shop right? Well, here is the solution for you now. You have to look at this bench top router table as it is perfect to be used in small shops. However, there are a few concerns that come with this router table and a few disadvantages that you must look upon before buying.
The main issue that comes with this table is that the table is not entirely flat in fact it is very curved from down. Although, their manual promises that it can be installed easily and without flaw but the main problem is that it just wastes your time and nothing else.
Although the exterior of this benchtop router table looks great when you talk about functioning and quality, it is not quite there. The main issue comes with leveling the plate and that is quite uneven. It is so uneven that it causes one side of the table to be upright while the other side to be down. This will continuously topple over the table.
One another concern is that the whole pattern of this bench type router table is not updated even after so many years have been passed. You have to drill in holes in the cast iron to fix it properly.
Apart from the cast iron, there is also the need to drill a hole in the fence rails. It will take a long time to drill these holes and then to set up the table. Even the MDF which is included with the bench router table is of different thickness. These problems relate to problems in alignment.
There is also the need for some serious modifications in order to install this router table. It might take up a long time for you to modify stuff and then assemble it properly. So overall, it will not be a very good choice to get this.
- Limited warranty
- Comes with mounting hardware, fence and router top
- Pro plate is sold separately
- Perfect to be used in small shops
- Pro fence can be used for many purposes
- Need for serious modifications
- Hole pattern not satisfying at all
- MDF included is of different thicknesses
- Levelling of the plate is quite uneven
6. Skil RAS900 Router Table
Are you in search of a router table that can store up your stuff as well? Well then this is the one that you might be in search of. In this router table, you can also store up your accessories and store inside stuff. There is no levelling required in this router table which is why it is quite a good choice to buy it.
However, you have to keep a few things in your mind before you buy this router table. You have to be 100 percent sure about buying it because there are a few negative points about this router table as well.
The main issue that comes with this router table is the mounting bracket which does not fit in any router. This means that either you have to scrape the table and modify it or else go for some another router table which can be quite annoying as well as time-consuming.
One more issue about this router table is that it is made up of cheap materials that can break off easily and since this is the issue there is a great concern about the durability of this router table. This router table is made up of so many cheap materials that it makes the Chinese stuff look actually good.
Apart from this, there are also some major issues about inaccurate measurement lines which will make it difficult for you to do the alignment of the router table. One more concern that this router table has is that it has no manual. Without a manual, it will be seemingly impossible for you to assemble this router table. Even if you visit their website, the manual cannot be downloaded.
The legs of this router table are wobbly and some parts do not even fit in the storage which is a big drawback. Apart from this, the cord is very small so you would need an extension if you want to use it.
If you want some good results, then you should not buy this router table because there is a lot to consider about them. The router table does not also hold itself up which can be a great difficulty considering you have to use it.
- Accessory storage containers for storage
- Two feather boards included
- Clamp system included
- Starter pin and guard help support also included
- No levelling required
- Storage parts included
- Mounting bracket does not fit in any router
- Does not include any manual
- Made up of cheap materials
- Legs of the table are quite wobbly and the table won’t stand up
Check out some other similar products available on the market: